[GARAGE SALE] – Garrett GVW-45 45mm Wastegate Kit – Black

Description Reviews (0) ******THIS IS NOT A NEW CONDITION PRODUCT – NO ACCEPTABLE REFUNDS – READ BELOW****** OPEN BOX, NEVER INSTALLED Garrett GVW-45 45mm Wastegate Kit – Black External Wastegates: Features CFD tested for maximum flow and thermal efficiency Optimized actuation stability and temperature resistance for superiordurability Replaceable valve and bushing components to increase service life Robust design for easy diaphragm replacement Liquid-cooled actuator ports for use on severe applications(up to 52% reduction in body temp) Anodized aluminum actuator cover Four Colors: Red | Blue | Black | Silver Three Sizes: 40mm | 45mm | 50mm Springs | Fittings | Flanges | V-bands included Standard Base Pressure: 1 Bar | 14.5 PSI Maximum Base Pressure:GVW40: 25 PSI | 1.7 BarGVW45 | GVW50: 23 PSI | 1.6 Bar Minimum Base Pressure: 3 PSI | 0.2 Bar GVW External Wastegates Model Red Blue Black Silver Base Pressure Spring Chart Install Guide GVW-40 908827-0001 908827-0002 908827-0003 908827-0004 1 Bar | 14.5 PSI Download Download GVW-45 908828-0001 908828-0002 908828-0003 908828-0004 1 Bar | 14.5 PSI Download Download GVW-50 908829-0001 908829-0002 908829-0003 908829-0004 1 Bar | 14.5 PSI Download Download Garrett engineers created GVW as a high flowing product with low degradation in performance over its lifespan. Heres how the three GVW wastegate sizes flow in LBS/MIN and KG/SEC at various increments of the valve stroke. Material Data The valve housing is cast from high temp stainless steel and rated for exhaust temperatures up to 1050 C. CFD optimized for maximum flow and thermal efficiency. Valve Housing: High temp stainless steel rated up to 1050 C Diaphragm: High temp Nomex reinforced elastomer Actuator Cover: Fully-machined anodized 6061 aluminum Valve Guide | Bushing:Nitronic 60 Valve:high temp stainless steel with plated stem V-Band:CNC machined 304 stainless steel Flanges:Fully-machined 304 stainless steel Springs:17/7 PH stainless steel Mechanical Data Garrett Vent | External Wastegates are created by the engineers that designed G-Series and GTX Gen II turbochargers. Available in three sizes: 40mm | 45mm | 50mm Valve Diameter:40mm | 45mm | 50mm Valve Mass: (40mm)1.27kg | 45oz (45mm) 1.47kg | 52oz (50mm) 1.56kg | 55oz Max Spring Base Pressure: 1.7 bar | 25 psi (1:1 backpressure ratio) Minimum Spring Base Pressure: 0.2 bar | 3 psi (1:1 backpressure ratio) Port Fitting | Air: M10x1.0 to hose barb (hose ID 6mm | .25in) Port Fitting | Water: M8x1.0 to AN-3 Thermal Data When researching and testing common shortfalls of wastegates, we observed how heat cycling and normal wear can rapidly change their actuation characteristics. Garrett engineers created GVW as a high flowing product with low degradation in performance over its lifespan. Actuation data (opening and closing) in the chart was measured before and after extreme testing conditions. Results show the heat cycled GVW product maintains linear control of the wastegate as compared to the new product. Precise actuation of the GVW provides accurate calibration settings and performance throughout the lifespan of the product. Accurate wastegates, allow for optimum performance of the turbocharger. Max Thermal Stress (non-cooled):270C actuator body temp during thermal cycle test Max Thermal Stress (liquid-cooled): 130C actuator body temp during thermal cycle test Max Exhaust Temp | Peak:Up to 1050C 4 Color and Size Options GVW Wastegates are available in four colors and three sizes Sizes:40mm | 45mm | 50mm Colors:Red | Black | Blue | Silver Kit Contents GVW Wastegates include all the following parts: Springs V-Band: Inlet | Outlet Outlet Flange Inlet Flange Valve Seat Washers: M8 | M10 Water Fittings Banjo Bolt and Banjo Fittings Air Plugs Wastegate Springs GVW wastegates are set to 1 Bar | 14.5 PSI of base pressure and can be configured from 0.2 Bar | 2.9 PSI 1.7 Bar | 24.7 PSI (considering 1:1 backpressure). Use the chart to reference wastegate size and spring color to identify Garrett GVW wastegate spring pressures Wastegate Flange Specs GVW Wastegate flanges can be references in this data: GVW-40: Inlet OD 55.4mm | 2.18in Outlet OD 48.9mm | 1.93in (Interchangeable with Tial MV-S) GVW-45: Inlet OD 63.5mm | 2.50in Outlet OD 55.4mm | 2.18in (Interchangeable with Tial MV-R) GVW-50: Inlet OD 68.0mm | 2.68in Outlet OD 63.5mm | 2.50in (Interchangeable with Turbosmart Gen V ProGate 50) Serviceability- Replacement Kits Replacement part kits are available for GVW wastegates. See chart for part numbers and torque specs. Air Fitting Kit (Banjo fitting, bolt, 2 crush washers) Diaphragm Kit (Diaphragm assembly, valve stem nut) Valve | Bushing Kit (Valve, bushing, seal washer, O-ring, valve stem nut, seat) V-band Inlet (V-band, bolt, locknut) V-Band Outlet (V-band, bolt, locknut) GVW Wastegate Placement Suggestions Wastegate placement on the exhaust manifold is a key factor in wastegate performance. The following suggestions can help identify the best choice when purchasing or fabricating an exhaust manifold for your project. The connection on the manifold greatly affects flow capability, and correct orientation of the wastegate to the manifold is essential. The ideal connection is at 45 with a smooth transition (Figure 1). Placing the wastegate at 90 to the manifold (Figure 2) will reduce flow capacity by up to 50 percent and can cause over boosting! More reduction in flow capacity will result if the wastegate is placed at angles greater than 90 (Figure3). Figures 2 and 3 greatly reduce the control you have over the system and can put your entire drive train at risk. Never mount the wastegate to the turbine housing at any time, this will reduce the performance of the turbocharger (Figure 4). Contact an authorized distributor for additional information. Wastegate Port Fittings GVW wastegates feature a water-cooling circuit which allows the product to be operated in extremely high temperature conditions while maintaining its actuation characteristics. Water-cooling symbols are etched near both of the fitting ports for easy identification. If watercooling, both ports must be used to create a coolant loop. (2) Water fittings and (2) washers are included and can be installed with a 14mm wrench or socket. There are two air ports on the top cap and three air ports on the valve body. (2) 14mm Banjo fittings with washers and (3) 5mm hex head air plugs are included.Please see the boost control section for more information on how to install the port fittings based on your application. Reviews There are no reviews yet. Be the first to review “[GARAGE SALE] – Garrett GVW-45 45mm Wastegate Kit – Black” Cancel replyYour email address will not be published. Required fields are marked *Your rating * Rate… Perfect Good Average Not that bad Very poor Your review *Name * Email * Save my name, email, and website in this browser for the next time I comment.